AMHTDOL ELM327 USB OBD2 Scanner with FT232RL 18F25K80 Chip | Read & Clear Engine Codes

• V1.4 FT232RL 18F25K80 Original Chip — This elm327 adapter uses a stable, high quality, genuine original chip FT232RL and PIC18F25K80 microcontroller, which adds key features such as automatic protocol.
• Compatibility — The elm 327 supports models manufactured after 1996 that utilize the OBD2 protocol (including VPW, PWM, ISO, KWP 2000, CAN protocol). This elm327 usb scanner works as a normal OBDII/EOBD/CAN car code reader on most vehicles.
• Multiple Function — This elm327 can read fault codes & clear check engine lights, access all electronic control units: engine, gearbox, ABS, climate control, etc.What's more, you can access and apply these to your vehicles: the Global Window Mod, Bambi Mod, reverse tilt mirrors, tire size correction, Perpendicular Park, Secure Idle, 5 turn signal flash, heated steering wheel, disabled double horn honk, disabled door ajar chime and more.
• Extensive Software Support — This elm327 obd2 scanner is compatible with a wide range of third-party diagnostic software applications. Such as,Scan-Master,Scan-tool,Proscan,PcmSCAN,Digimoto,FOR-Scan,MelcoDiag,JpDiag and so many.You can choose the software that suits your preferences and needs.
• Friendly Tip — You need to download the software on MEGA and install the USB driver. You can refer to the attached user manual for details.
• Warranty — If you are not satisfied with a product you ordered or if it is defective or damaged, you can return it to us within 30 days of the purchase date, and we will refund or replace the entire item.If you have any questions, please feel free to contact us, we will always make a satisfying service to you.

• Install Software and Driver — Download the necessary diagnostic software and USB driver from the provided MEGA link onto your Windows 7, 8, 10, or XP computer. Follow the on-screen instructions for a smooth installation process.
• Connect Scanner to Vehicle — Locate your vehicle's 16-pin OBD2 port, typically found under the dashboard near the steering column. Plug the AMHTDOL ELM327 USB scanner firmly into the port.
• Connect to PC and Launch Software — Connect the other end of the USB cable to your computer. Turn on your vehicle's ignition (engine does not need to be running). Launch your chosen diagnostic software and establish a connection with the scanner.
• Read and Clear Codes — Use the software interface to scan for fault codes (DTCs). Once identified, you can analyze the codes and, if the issue is resolved, use the software to clear the check engine light.

Typical situations where AMHTDOL ELM327 USB OBD2 Scanner with FT232RL 18F25K80 Chip | Read & Clear Engine Codes helps — illustrative scenarios, not customer reviews.