What is the best machine lubricant in India?

The 'best' machine lubricant depends on the specific application. For hydraulic lifter noise and cleaning, Liqui Moly Hydraulic Lifter Additive is a highly-rated German-engineered option. For general engine oil improvement, consider Liqui Moly Cera Tec or Motor Protect. Always check compatibility with your engine oil and vehicle specifications.

Is Liqui Moly Hydraulic Lifter Additive safe for my engine?

Yes, Liqui Moly Hydraulic Lifter Additive is safe for most gasoline and diesel engines, including those with turbochargers and catalytic converters. It's tested for compatibility with all commercially available engine oils and won't harm emission control systems. Always follow the recommended dosage.

How long does it take to notice results from Liqui Moly Hydraulic Lifter Additive?

Results can often be noticed within a few hundred kilometers of driving after adding the product to your engine oil. For persistent noises or significant valve bore cleaning, it may take up to 1,000 km to observe the full benefits of improved lubrication and reduced engine noise.

Can I use Liqui Moly Hydraulic Lifter Additive with synthetic oil?

Yes, Liqui Moly Hydraulic Lifter Additive is designed to be mixed with all commercially available engine oils, including synthetic oils. It is formulated to maintain its effectiveness and compatibility regardless of the base oil type used in your engine.

What are the benefits of using a hydraulic lifter additive?

Hydraulic lifter additives help to clean and lubricate the hydraulic lifters in your engine, reducing or eliminating ticking noises. They improve oil flow, ensure optimal valve operation, and can prevent wear, contributing to a quieter, smoother-running engine and potentially extending component life.

Does this product help with engine oil stabilizer?

While this additive focuses on hydraulic lifters and valve cleaning, it also improves the overall lubrication properties of the engine oil. For broader engine oil stabilization and wear protection, Liqui Moly offers products like Cera Tec or Motor Protect.

How much additive should I use per litre of hydraulic fluid?

The 300 ml bottle of Liqui Moly Hydraulic Lifter Additive is sufficient for up to 6 liters (6.34 quarts) of engine oil. This means you use approximately 50 ml of additive per liter of engine oil. Always refer to the product label for precise dosing instructions based on your engine oil capacity.

Liqui Moly Hydraulic Lifter Additive 300ml | Cleans Valves & Quiets Tappets

Name: Liqui Moly Hydraulic Lifter Additive 300 ml (10.14 Fl Oz) | Cleans Valves & Quiets Tappets
Brand: Liqui Moly
SKU: nwa0781
Price: 2396.00 INR
Availability: InStock

About this item

Liqui Moly Hydraulic Lifter Additive is designed to silence noisy hydraulic lifters and ensure optimal engine operation. It effectively cleans valve bores and promotes better lubrication, making it suitable for all gasoline and diesel engines, including those with turbochargers and catalytic converters. This additive has been tested for compatibility and can be mixed with any commercially available engine oil.

The 300 ml bottle improves oil lubrication properties, preventing engine noises caused by hydraulic tappets. Its formula is tested for compatibility with catalytic converters, ensuring it won't harm emission control systems. The additive works by cleaning valve bores and promoting optimal operation of the hydraulic lifters.

For Indian car owners, this additive offers a solution to common engine noises. It's a direct import, ensuring you receive the authentic German-engineered product. All customs duties and GST are included in the price, with delivery via ExpressBox tracked shipping.

Key Features

Improves the lubrication properties of the oil
Cleans valve bores
Suitable for use in vehicles with turbochargers and vehicles with catalytic converters
Prevents engine noises caused by hydraulic tappets
Flash point: 60.0 degrees_celsius

Why choose this product

German Engineering for Engine Health

Liqui Moly, a globally recognized brand, brings its decades of expertise in automotive additives to India. This Hydraulic Lifter Additive is formulated with advanced chemistry to target specific engine noises and wear. It's not just an additive; it's a targeted solution designed to restore optimal hydraulic lifter function and improve overall engine health. Imported directly from authorized US retailers and authorized brand partners, you receive the genuine German-engineered product, ensuring quality and performance that local alternatives may not match.

Ideal for Indian Driving Conditions

This additive is particularly beneficial for vehicles operating in India's diverse climate and road conditions. It helps combat engine noise exacerbated by heat and stop-start traffic. It's ideal for petrol and diesel engines, including those with turbochargers and catalytic converters, common in many Indian vehicles. Skip if your engine has no hydraulic lifter noise or if you prefer not to use additives. If you have a very old engine with significant internal damage, this additive may help but cannot repair severe mechanical failures.

How to use

Start the engine and let it run for a few minutes to reach normal operating temperature. This ensures the engine oil is warm and fluid, allowing for better mixing of the additive. — Ensure Engine is Warm
Turn off the engine. Open the oil filler cap and pour the entire 300 ml bottle of Liqui Moly Hydraulic Lifter Additive into the engine oil. The 300 ml is sufficient for up to 6 liters of engine oil. — Add to Engine Oil
Close the oil filler cap securely. Start the engine and let it run for approximately 10-15 minutes to allow the additive to circulate throughout the engine. Then, drive normally. — Run Engine and Drive
Noticeable reduction in hydraulic lifter noise may occur within a few hundred kilometers. For persistent noise, a second application can be made during the next oil change, following the same procedure. — Observe and Reapply if Needed

Example scenarios

Typical situations where Liqui Moly Hydraulic Lifter Additive 300 ml (10.14 Fl Oz) | Cleans Valves & Quiets Tappets helps — illustrative scenarios, not customer reviews.

Scenario 1

Illustrative example

Where it helps

Engine ticking noise from hydraulic lifters after driving in hot Indian weather.

How this product helps

Add Liqui Moly Hydraulic Lifter Additive to your engine oil. It cleans and lubricates lifters, reducing noise within a few hundred kilometers, ensuring a quieter drive even in peak summer heat.

Scenario 2

Illustrative example

Where it helps

Concern about engine wear and performance in a turbocharged petrol car used for city commutes.

How this product helps

This additive improves oil lubrication and cleans vital engine parts, protecting against wear. Its compatibility with turbochargers ensures optimal performance and longevity for your daily drives.

Specifications

Composition

Flash Point	60.0 °C
Key Function	Hydraulic lifter cleaning and noise reduction
Compatibility	All commercial engine oils, gasoline/diesel engines, turbochargers, catalytic converters

Usage

Application	Add to engine oil
Treatment Ratio	300 ml sufficient for up to 6 liters (6.34 quarts) of engine oil
Cost per use	300 ml treats 6 L engine oil — ₹399 per L per 6L oil change
Shelf life after opening	24 months
Reapplication math	Recommended every 10,000-15,000 km or with oil change
Contraindications	Not for use in systems with severe mechanical damage; consult OEM for specific fluid compatibility.
Allergens / common irritants	May cause skin irritation. Avoid prolonged contact. Keep out of reach of children.

How we compare

Feature	Liqui Moly Hydraulic	Others
Noise Reduction	Quiets noisy lifters and tappets effectively.	Local additives may offer some noise reduction, but effectiveness varies widely by brand and formulation.
Valve Cleaning	Cleans valve bores and hydraulic lifter passages.	Some local products claim cleaning benefits, but specific valve bore cleaning is less common in generic oil additives.
Oil Lubrication	Improves oil lubrication properties for better engine performance.	General oil enhancers are available, but specialized lubrication improvement for lifters is a key feature of this product.
Engine Compatibility	Safe for turbochargers & catalytic converters; works with all engine oils.	Local additives may not always specify compatibility with modern engine components like turbochargers or catalytic converters.
Cost per 6L Oil Change	300ml treats 6L oil — ₹399 per L

SKU	nwa0781
GTIN	4100420083679
Brand	Liqui Moly
Product Name	Hydraulic Lifter Additive
SKU	8367
Volume	300 ml (10.14 Fl Oz)
Item Weight	0.33 kg (0.73 lb)
Dimensions	6 cm x 6 cm x 12 cm
Material	Liquid
Country of Origin	Germany (US retail version, sourced from authorized US retailers and authorized brand partners)

Attributes	Current Liqui Moly Hydraulic Lifter Additive 300 ml (10.14 Fl Oz) \| Cleans Valves & Quiets TappetsBuy Now	Weller ETP-5 Soldering Tip Set \| 5 PCS Conical 0.8mm (0.031")Buy Now	ProCase NRR 28dB Passive Noise Reduction Earmuffs \| Adjustable Metal Frame, Foldable Design, PinkBuy Now	Bentgo Salad Container, Lunch Bowl with 4-Compartment Toppings Tray, 1.9 L (54 oz) \| Leak-Proof Dressing Container, Reusable Fork, BPA-Free, Microwave & Dishwasher SafeBuy Now	JoyBros TriCut Replacement Brush for Dreame L40 Ultra Gen 2 X40 Ultra \| Fits L20 L30 X30 D30 D10 Plus Gen2, L10s Ultra Pro Ultra C20 Plus D9 Max Gen2, MOVA P10 P50 Pro Ultra E40 Ultra Robotic Vacuum CleanersBuy Now	STA-BIL Storage Fuel Stabilizer 4 oz (118 ml) Bottles — 24-Pack \| Keeps Fuel Fresh for 2 YearsBuy Now	AVANTEK Wireless Doorbell Kit 1300 ft Range, Black \| Waterproof Transmitter & 2 Plug-in ReceiversBuy Now
Spec
Price

Liqui Moly Hydraulic Lifter Additive 300 ml (10.14 Fl Oz) | Cleans Valves & Quiets Tappets

Product details

Frequently bought together

Crowcrowcrow: The Only Safe Lane for US-Market Exclusives

Tested and Trusted · Always Original & 100% Imported