KQZ 150W Solder Fume Extractor for Laser Engraver | 3-Layer Filtration, Low Noise, 280m³/h Airflow

• Brushless Motor, Better Effect — This 150W fume extractor is equipped with a brushless motor with a rotation speed as high as 6036RPM, bringing an astonishing air volume of 280m³/h. Compared with ordinary smoke purifiers, its rotation speed is 40% faster, pushing fume to quickly pass through the purification system. It can not only provide strong and stable power, but also effectively prolonging the service life of the motor, allowing the KQZ-Solder Fume Extractor to be your health guardian
• High Iodine Value Activated Carbon, 0 Smoke 0 Odor — Equipped with 3-layer filtration system, the Laser Fume Extractor has a filtration efficiency of up to 99.97% for particles. The Pre-Filter and Hepa filter can accurately filter out smoke particles as small as 0.03 microns. The high iodine value coconut shell carbon particles used in the third layer of filtration have an iodine adsorption value of more than 1000mg/g, which is twice that of ordinary carbon particles. It brings you an unprecedented pure air experience
• Intelligent Control, Practical & Technological — This Soldering Fume Extractor is equipped with advanced LED intelligent control function. You can precisely increase or decrease the speed. The timing function is more considerate and practical. You can make it operate at specific times and locations. It also has a custom anti-clogging alarm function. When the filter is clogged, it will send out an alarm in time to remind.Enjoy the convenience and safety brought by technology
• Quiet Operation, Thoughtful Configuration — This fume extractor selects aviation sound insulation materials with extremely excellent sound absorption and noise reduction characteristics. The noise is only 55db during normal use. We have thoughtfully equipped with 10 pieces of pre-filter for easy replacement. The flexibility of the included hose makes the connection between it and the laser machine more convenient and can ensure that the smoke is quickly sucked in for purification treatment
• Easily Handle Various Places — In fact, only high-power machines like KQZ-150W Welding Fume Extractor can truly and effectively deal with the smoke generated especially in laser cutting and engraving. While those cheap and low-power air purifiers often have unsatisfactory effects. They may not be able to provide enough power, resulting in smoke spreading. This machine is also the first choice for places that will produce fume and special odors, such as solder work, DFT, 3D printing and so on
• KQZ has a professional customer service team to provide you with 24/7 customer support. If you have don't know how to choose the Solder Fume Extractor that best suits your needs, or have any after-sales problems, feel free to contact us at any time. We can recommend the most suitable product model and configuration for you according to your specific usage scenarios and give professional answers and suggestions. Choose KQZ, Choose the quality product, Choose the professional customer service

• Position the Intake Hose Near Fume Source — Place the flexible hose within 10-15cm of laser or soldering point for optimal fume capture. Ensure the device is on a stable surface.
• Adjust Speed and Timer — Use the LED control panel to set the desired suction speed and timer. Start with medium speed for continuous operation.
• Monitor Filter Status — Check the anti-clog alarm regularly. Replace pre-filters every 2-4 weeks and main filters every 6 months for sustained performance.
• Maintain and Clean — Clean pre-filters regularly. Keep the device in a dry, ventilated area. Ensure filters are replaced as per schedule for best results.

Typical situations where KQZ 150W Solder Fume Extractor for Laser Engraver | 3-Layer Filtration helps — illustrative scenarios, not customer reviews.