InstallGear 14 Gauge Speaker Wire 30ft (9.1 m) | Copper Clad Aluminum Cable for Car Audio & Home Theater

• 30-FEET (9.1m) FROSTED BLUE/BLACK 14 GAUGE WIRE SPEAKER: The lower the gauge number, the thicker the wire. Thicker wire presents less resistance to current flow.
• COPPER CLAD ALUMINUM (CCA): CCA wiring provides a good conductor for transmitting audio. This is the most economical option when choosing speaker wire.
• RUGGED PVC JACKET: Allows wide and seamless adjustment of the required physical properties of this wire such as flexibility, elasticity, and impact resistance.
• EASY POLARITY IDENTIFICATION: This two color jacket allows for easy polarity identification. Making a polarity mistake could be damaging to your audio equipment.
• SOFT TOUCH JACKET: The jacket on our cable is designed with the installer in mind. The flexibility of this jacket allows for easy routing and has a low memory.

• Identify Polarity — Observe the blue and black jacket colors on the InstallGear speaker wire. One side will have a blue stripe or marking, indicating positive (+), while the other is black, indicating negative (-).
• Prepare Wire Ends — Cut the wire to the desired length. Carefully strip about 1/2 inch (1.25 cm) of the outer PVC jacket from both ends to expose the CCA conductors. Twist the strands of each conductor tightly.
• Connect to Amplifier/Receiver — Connect the exposed wire ends to the appropriate speaker output terminals on your amplifier or receiver. Match the blue-striped wire to the positive (+) terminal and the black wire to the negative (-) terminal.
• Connect to Speaker — Connect the other ends of the speaker wire to the corresponding terminals on your speaker. Again, match the blue-striped wire to the positive (+) terminal and the black wire to the negative (-) terminal on the speaker.

Typical situations where InstallGear 14 Gauge Speaker Wire 30ft (9.1 m) | Copper Clad Aluminum Cable for Car Audio & Home Theater helps — illustrative scenarios, not customer reviews.