JJC HB-102 Lens Hood for Nikon Z 24-120mm f4 S & 28-400mm f4-8 VR Lenses | Reversible Bayonet Mount Shade

• Replace HB-102 Lens Hood — The lens hood is compatible for Nikon Z 24-120mm f/4 S and Nikon Z 28-400mm f/4-8 VR Lens (Only).
• SHOCKPROOF — Whether shooting in the light, backlight, night, etc., can effectively reduce the effect of stray light on the image, improve clarity. Accidental collision, which can reduce the damage of the lens, and provide extra protection for your lens.
• REVERSIBLE — The lens hood can be reversed on the lens to reduce space and facilitate storage and carrying of the camera.
• NON-GLARE MATTE FINISH — Made of high quality ABS material, Light and Durable. Non-glare matte finish on the interior surface of the lens hood helps to minimize flare by deflecting stray light from entering the lens and no vignetting with the hood on.
• EASY TO USE — Easy to install, connect the hood directly to the lens through bayonet.Allows putting on a Ф77mm filter and a Ф77mm lens cap.

• Identify Lens Mount — Confirm your Nikon Z camera lens is either the 24-120mm f/4 S or the 28-400mm f/4-8 VR. The hood is designed specifically for these models.
• Attach the Hood — Align the bayonet mounts on the hood with the corresponding slots on the lens. Push the hood gently and twist clockwise until it clicks securely into place.
• Use Filters and Caps — If needed, screw a 77mm filter onto the front of the lens or hood. A 77mm lens cap can also be attached to the hood for protection when not in use.
• Reverse for Storage — To reduce space for transport, detach the hood, rotate it 180 degrees, and re-mount it in the reversed position on the lens.

Typical situations where JJC HB-102 Lens Hood for Nikon Z 24-120mm f4 S & 28-400mm f4-8 VR Lenses | Reversible Bayonet Mount Shade helps — illustrative scenarios, not customer reviews.