Elitech WJL-6000 Halogen Refrigerant Leak Detector | Detects R22, R134A, R410A, 1234YF & More

• All Halogenated Gas — Freon leak detector triggers on R22, R134A, R404A, R410A, R1234YF and all halogenated refrigerants including HFCs, CFCs,HCFCs and blends.
• 7 Adjustable Sensitivity — Turn the knob to open and choose the sensitivity level. Maximum sensitivity up to 0.21oz/yr, which is enough to self -check auto AC or air conditioning and other.
• Multiple Indicators — Equipped with Audible and Visual gas leakage indicators and dual battery indicators.
• Turn On and Use — The electronic refrigerant leak detector response within 3 seconds. Warm up in 6 seconds, the shortest time in gas detectors.
• 7.9-inch probe — A flexible probe allows detections in difficult and hard-to-reach areas. 24/7 US Technician Support via Email and Phone.

• Install Batteries — Open the battery compartment and insert 4 AA batteries (not included), ensuring correct polarity. The dual battery indicators will show the charge level once powered on.
• Power On and Warm-Up — Turn the sensitivity knob to power on the device. Wait approximately 6 seconds for the unit to warm up and stabilize before proceeding to detection.
• Detect Leaks — Slowly move the 7.9-inch flexible probe around suspected refrigerant lines, connections, and components. Listen for audible beeps and watch for visual LED alerts indicating a leak.
• Adjust Sensitivity — If needed, adjust the sensitivity level using the knob to fine-tune detection for different leak sizes or ambient conditions. The device resets within 2-10 seconds between checks.

Typical situations where Elitech WJL-6000 Halogen Refrigerant Leak Detector | Detects R22 helps — illustrative scenarios, not customer reviews.