HTZSAFE Wireless Driveway Alarm Long Range Motion Sensor System | 1/2 Mile Transmission, Weather Resistant

• WIDE RANGE OF APPLICATIONS : The wireless weather resistant motion sensor can be used to monitor&protect your outdoor/indoor property. Such as driveway, front porch, gate,pool,garage,shed and etc. Great for home, business,and office.The sensor will work properly at all the seasons. Working temperature range from -30 to 150 degree Fahrenheit.
• 1/2 MILE LONG WIRELESS TRANSMISSION RANGE : Both the motion sensor and plug-in receiver pick up alarm signals up to 1/2 mile away(actual range will vary depending on the local terrain), it is a great solution even you have a large perimeter or property to monitor. The system adopts improved wireless transmission technology(FSK+FHSS) to avoid the wireless signal interference from other devices.
• 50-FT WIDE MOTION DETECTION RANGE : The motion sensor will detect moving people or vehicles from 35 feet to 50 feet in front of it. Improved motion detection chip and detection angle to reduce the false alarms from dead leaves/small animals/sunlight/wind/temperature changes and etc. It has 2 adjustable sensitivities( Low=35ft; High=50ft), ideal for driveways, walking paths,yard,garage,gate,pool and anywhere of your outdoor/indoor property you want to be alerted.
• PLUG&PLAY,SUPER EASY TO INSTALL : Power on the motion sensor by 3pcs AA 1.5V Alkaline batteries(the package does not include the batteries) and plug the receiver into the outlet,here we go. The unit has been programmed before shipped, place the sensors to walls, fence posts, trees, or any other surface,the installation time can be as little as a few minutes.
• FULLY EXPANDBLE SYSTEM - The unit includes one plug-in receiver and one motion sensor. Expandable up to 32 sensors and unlimited receivers for complete coverage of your outdoor/indoor property. 4 volume levels adjustment and 35 optional melodies. Match different melody with different sensors around your property to differentiate where motion is being detected.

• Install Batteries — Open the motion sensor casing and insert 3 AA 1.5V alkaline batteries (not included). Ensure correct polarity. Close the casing securely.
• Plug in Receiver — Connect the receiver unit to a standard electrical outlet in your home or office. The unit is pre-programmed and ready to pair with the sensor.
• Position Sensor — Mount the motion sensor in the desired outdoor or indoor location, such as a fence post, wall, or tree, facing the area you wish to monitor. Adjust sensitivity (Low=35ft, High=50ft) as needed.
• Configure Alerts — On the receiver, select your preferred melody and adjust the volume level using the provided controls. Test the system by walking in front of the sensor to confirm alerts are received.

Typical situations where HTZSAFE Wireless Driveway Alarm Long Range Motion Sensor System | 1/2 Mile Transmission helps — illustrative scenarios, not customer reviews.