Daniel Smith Watercolor Ground 4 oz Transparent | Versatile Watercolor Base for Artists & Hobbyists

• Absorbent or semi-absorbent surfaces (such as paper, canvas, other fabrics, Wood, plaster, shells and hardboard) require no special prep before brushing on Daniel Smith watercolor ground
• Apply straight from container using a soft-haired synthetic brush for a smooth finish, or a hog bristle brush for a more textured finish, one coat will cover most surfaces
• Curing: to allow watercolor ground to attain the correct degree of absorption, let watercolor ground dry and cure for at least 24 hours
• Because it creates a surface more absorbent than paper, Daniel Smith works best in conjunction with lower-water paints, such as watercolors and thinned acrylics
• Finishing: as with all watercolors, your work on Daniel Smith watercolor ground will need to be fixed if it will not be Framed behind glass

• Prepare Surface — Ensure your surface (paper, canvas, wood) is clean and dry. No special prep needed for most surfaces.
• Apply Ground — Use a synthetic or hog bristle brush to apply a thin, even coat from the container. Cover the entire surface for best results.
• Dry & Cure — Allow the applied ground to dry and cure for at least 24 hours before painting for optimal water absorption and durability.
• Start Painting — Begin watercolor or thinned acrylic work once the surface is fully cured. Fix your work if not framed behind glass.

Typical situations where Daniel Smith Watercolor Ground 4 oz Transparent | Versatile Watercolor Base for Artists & Hobbyists helps — illustrative scenarios, not customer reviews.