Charlotte Pipe 3" Long Sweep PVC DWV Pipe Fitting - 1/4" Bend, Schedule 40, White | Non-Pressure Drain, Waste, Vent

• DRAIN, WASTE, VENT: Poly Vinyl Chloride (PVC) White pipe and fittings are used in sanitary drain, waste, and vent (DWV), sewer and storm drainage applications
• NOT FOR PRESSURE USE: They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140° F.
• CHARLOTTE PIPE PVC: It is non-toxic and meets the most stringent standards in the industry. NSF Standard 14. ASTM D 1784 & ASTM D 2665 & ASTM D 3311
• EASY TO INSTALL: PVC is lightweight, They require no special tools for cutting, and can be installed with solvent cementing, threading, flanging, and roll-grooved joining.
• MADE IN THE USA: For over a century, Charlotte Pipe has been manufacturing pipe and fittings, employing more than 1,400 loyal, hard-working Americans. All of our products are proudly made in the USA.

• Prepare the Pipe Ends — Cut the PVC pipe to the desired length using a pipe cutter for a clean, square end. Ensure the pipe end is free of burrs and debris. For solvent cementing, lightly prime the pipe end and the inside of the fitting socket.
• Apply Solvent Cement — Apply a liberal, even coat of appropriate PVC solvent cement to both the pipe end and the inside of the fitting socket. Work quickly as the cement dries fast.
• Join and Secure — Insert the pipe fully into the fitting socket with a slight twisting motion to ensure full contact. Hold firmly for 15-30 seconds to prevent push-out. Allow adequate cure time as per cement manufacturer's instructions before testing.

Typical situations where Charlotte Pipe 3" Long Sweep PVC DWV Pipe Fitting - 1/4" Bend helps — illustrative scenarios, not customer reviews.