CCJH 5.5FT Sliding Barn Door Hardware Kit for Single Wooden Door | Heavy Duty Steel Track System

• To hang single door, 5.5FT kit fits maximum door width 33''.
• Door weight capacity: 330 lb for each door; Fit Door panel thickness: 1 3/8"-1 15/16".
• Material: Metal&Steel, Surface: Frosted Black, Roller wheel bearing:GCr15, Lifetime warranty.
• Package Include: 2xRollers; Spliced 5.5ft Track (pre-drilled); 2XStoppers; 2XAnti-jump Disk; 1XFloor guide; 1XInstallation manual, and all other accessories. NO DOOR INCLUDED.
• Manufacturer's direct marketing; Through Strict QC, Meticulously packaged to avoid scratches in shipment; Professional Customer service team help you solve all installation problems in time.

• Prepare the Door and Wall — Ensure your wooden door panel is between 1.18"-1.97" thick and no wider than 33" (approx. 84 cm). Measure the distance from the top of the door to the ceiling, ensuring it's at least 6.7" (17 cm). Mark the wall for track mounting, ensuring it's level.
• Install the Track and Rollers — Attach the spliced 5.5ft track securely to the wall using the pre-drilled holes and provided hardware. Mount the two rollers onto the top of your wooden door panel, ensuring they are evenly spaced and aligned.
• Hang the Door and Attach Accessories — Carefully lift the door and hang the rollers onto the track. Attach the stoppers to the ends of the track to prevent the door from rolling off. Install the floor guide at the bottom of the door to keep it stable and prevent swinging.
• Test and Adjust — Gently slide the door back and forth to test its movement. Ensure it glides smoothly and quietly. Adjust the floor guide and stoppers as needed for optimal performance and safety. Refer to the manual for detailed instructions.

Typical situations where CCJH 5.5FT Sliding Barn Door Hardware Kit for Single Wooden Door | Heavy Duty Steel Track System helps — illustrative scenarios, not customer reviews.