Capri Tools 10 mm Universal Socket, 1/4-Inch Drive, 6-Point Metric | Grips Fasteners Tightly

• Our universal sockets have a 40-degree working angle and rotate smoothly in 360 degrees, letting you reach and apply torque to fasteners even in tight spots
• Premium Chrome Vanadium steel tempered with our proprietary heat treatment process to withstand more torque
• SmartKrome plating, achieved through thorough polishing and careful application of chrome protective plating, ensures durability and corrosion resistance. Permanent stamped sizing does not fade over time
• 6-point WaveDrive design grips fasteners more tightly than traditional design, preventing fastener rounding and giving you more leverage
• Size: 10 mm

• Choose a 1/4-inch drive ratchet or extension bar that matches the socket's drive size. Ensure the ratchet is in good working condition and set to the correct rotation direction for tightening or loosening. — Select Compatible Ratchet
• Firmly push the socket onto the drive end of the ratchet until it clicks into place. Verify it is securely attached to prevent it from slipping off during use. — Attach Socket Securely
• Position the socket onto the 10mm fastener, ensuring it is fully seated. Utilize the 40-degree working angle to access the fastener if it's in a restricted area. Apply steady, controlled torque to tighten or loosen as needed. — Engage Fastener and Apply Torque

Typical situations where Capri Tools 10 mm Universal Socket helps — illustrative scenarios, not customer reviews.