BUTUZE Convenient Leather Edge Dye Pen with Copper Roller Applicator | 13cm (5.2in) Aluminum Body

• Edge dye pen size:length is 5.2inch/13cm,width is 0.6inch/1.5cm,head length is 0.7inch/1.8cm.
• Versatile:Convenient leather edge printing supplies ,with easy usage,can be used for printing all kinds of leather projects,like tanned leather,or fabrics,canvas.
• Characteristic:Pen body material is aluminum, High density,it can be well protected from corrosion.The addition of certain alloying elements can increase casting properties.And,this edge dye pen can be disconnected,easy to use,convenient to wash.
• Superior Making Material:The pen head is made by pure copper ,not easy to damage,high intensity,strong corrosion-resistance.Pen surface is printed by electroplating spray paint,high gloss,beautiful and practical.
• Recommend Usage Steps 1: Let cotton add adequate amount of water,swab to the leather edge. 2:Use rough sand paper smooth the edge. 3:Use leather skiver thin the leather edge. 4:Use cotton add adequate amount of water, swab to the leather edge again. 5:Use smooth sand paper smooth the edge. 6:Use roller applicator dip the oil paint, apply it on leather edge,and be careful not to exert too much force.

• Prepare the Leather Edge — Smooth the leather edge using sandpaper after thinning it with a skiver. Apply a small amount of water to the edge with cotton to prepare it for dye application.
• Apply Edge Dye — Dip the copper roller applicator head into your chosen edge dye or paint. Apply it evenly along the leather edge, being careful not to exert excessive force for a controlled finish.
• Clean and Store — After use, disassemble the pen and clean the copper head and aluminum body thoroughly. Seal the oil box and store the pen in a cool place to prevent the dye from drying out.

Typical situations where BUTUZE Convenient Leather Edge Dye Pen with Copper Roller Applicator | 13cm (5.2in) Aluminum Body helps — illustrative scenarios, not customer reviews.