Brileine RJ45 Crimp Tool Pass Through Kit Ethernet Crimper Cat5 Cat5e Cat6 with Cable Tester & Connectors (Yellow, 13.5cm)

• RJ45 CRIMP TOOL: Ethernet crimper tool for 6P/8P Pass Through cat6, cat6A, cat5 and cat5e connectors plugs, suitable for 23AWG-28AWG cable
• PASS THROUGH DESIGN: The Pass Through technology significantly improves work efficiency and has100% succses rate, Fast and Reliable
• MINI DESIGN: Compact design is 2/3 the size of traditional crimping pliers, weighs 1/3 less than traditional pliers, and can be operated with one hand.
• All-IN-ONE ETHERNET CRIMPER: A professional RJ45 crimper that can easily cut, strip, and crimp CAT5, CAT5e and CAT6/6A cables. Even if you are a beginner, you can also quickly complete the installation according to our user's manual
• AFTER-SALES SERVICE: If you have any questions or requirements about our RJ45 pass through crimper within 18 months, please feel free to contact us to get satisfactory solution

• Using the included mini wire stripper, carefully remove about 1 inch of the outer jacket from the Ethernet cable. Untwist the internal wires and arrange them in the correct order (e.g., T568B standard) before trimming them to ensure they are even. — Prepare the Ethernet Cable
• Insert the prepared wires into the Brileine RJ45 pass-through connector, ensuring each wire goes through the correct channel. Push the connector into the crimping tool's slot and squeeze the handles firmly to crimp and trim the excess wires simultaneously. — Crimp with Pass Through Connectors
• Connect both ends of the newly crimped Ethernet cable to the included network cable tester. Turn on the tester; LEDs will light up sequentially from 1 to G (or 1 to 8). If all lights illuminate correctly, the cable is functional. Troubleshoot any issues based on the tester's feedback. — Test the Network Connection

Typical situations where Brileine RJ45 Crimp Tool Pass Through Crimper Kit with Cable Tester & Stripper | 2.7 x 5.3 inches helps — illustrative scenarios, not customer reviews.