Brampton PRO-FIX Long Cure Golf Epoxy 25ml (0.85 Fl Oz) | Extra Strength for All Golf Shafts and Heads

• FULL SET WORK LIFE: PRO-FIX Long Cure Golf Epoxy has a 20 minute work life making it perfect for building a full set of golf clubs
• EXTRA DURABILITY: PRO-FIX Long Cure Golf Epoxy is engineered for the high impact of golf shafts/heads and swing speeds over 130 mph
• EXTRA STRENGTH: PRO-FIX Long Cure is the preferred epoxy for Long Drive Competitions because of its extreme bond strength
• USED BY PROS: PRO-FIX Long Cure Golf Epoxy was designed by professional clubmakers and a chemical engineer making it unlike any other golf glue or golf epoxy on the market
• MADE IN THE USA: Brampton Technology manufactures PRO-FIX Long Cure Golf Epoxy in the USA with the highest quality standards

• Prepare Shaft and Head — Clean both the inside of the golf shaft tip and the outside of the club head hosel thoroughly. Remove any old epoxy, dirt, or grease using a suitable solvent. Ensure surfaces are dry and ready for bonding.
• Mix Epoxy Components — Dispense equal parts of the epoxy resin and hardener onto a clean, disposable surface. Mix thoroughly for the specified work life (20 minutes), ensuring a uniform color and consistency. Avoid mixing more than you can use within this time.
• Apply and Assemble — Apply the mixed epoxy evenly to both the shaft tip and the hosel. Insert the shaft into the head, twist slightly to distribute epoxy, and align the club face to the desired angle. Secure with tape or a clamp if needed.
• Cure and Finish — Allow the club to cure for a full 24 hours at room temperature. Avoid any stress or impact during this period. Once fully cured, excess epoxy can be carefully removed, and the club is ready for play.

Typical situations where Brampton PRO-FIX Long Cure Golf Epoxy 25ml (0.85 Fl Oz) | Extra Strength for All Golf Shafts and Heads helps — illustrative scenarios, not customer reviews.