BETAFPV Aquila16 FPV Kit with LiteRadio 2 SE Transmitter for Simulator, VR03 Goggles with DVR Recording, 3 Flight Modes, 1S RTF for FPV Beginners

• 8Mins Flight — The Aquila16 FPV Kit comes with a default 1100mAh battery, ideal for beginners seeking a smooth flying experience in N/S mode, it offers a flight time of 8 minutes and a maximum flight distance of 200 meters indoors or outdoors. Pilots also can use the 650mAh battery which is exclusive for the Aquila16 in M mode (The 650mAh needs to order separately)
• Video & Goggles — The Aquila16 FPV Kit comes with VR03 FPV Goggles, which feature a video recording function and compatibility with most Analog VTXs on the market. It also features a high-power, low-latency 350mW video transmission system, guaranteeing real-time video transmission with stable signals up to 200 meters and a high-quality 58G 3dBi antenna for stable video transmission and vivid images. With a 4.3-inch 800*480px HD high-brightness LCD, VR03 Goggles will show you a bright world
• Signal about the Camera — After a few times of use, the cable about the camera may loose when crashing or hitting often and then lost the signal and image on the goggles, please plug and unplug the cable of the camera if the drone or the goggles lost the signal and check the goggles whether is full charger
• LiteRadio 2 SE Transmitter — Aquila16 FPV Kit pack with LiteRadio 2 SE Transmitter that comes with the factory default ELRS V3 firmware, which brings a wider operating range. Updates with BETAFPV self-developed LiteRadio System, enabling pilots to conveniently perform Joystick Calibration and Firmware Upgrades directly on the transmitter, enhancing usability and ease of use. And it also supports pilots to learn and practice flying a quadcopter through an FPV simulator before real flying
• Flight Modes — The Aquila16 Brushless Quadcopter offers N/S/M 3 flight modes and supports 3 different speeds with SLOW/MID/FAST. With Turtle Mode, no burden to fly away, and there is no need to walk away to correct the position manually to flip it over and resume flying when the quadcopter falls to the ground and upside down. But please note that the position hold function is only available in N mode

• Charge Batteries and Setup — Connect the included charger to batteries, fully recharge within 1 hour. Attach batteries to drone and goggles, ensure firmware is updated if needed.
• Power On and Calibrate — Switch on the LiteRadio 2 SE transmitter, goggles, and drone. Calibrate joystick and check video feed. Adjust camera angle if necessary.
• Begin Flying — Start with N mode, practice basic controls indoors. Use Turtle Mode for recovery. Monitor battery levels and control range during flight.

Typical situations where BETAFPV Aquila16 FPV Kit with LiteRadio 2 SE Transmitter for Simulator helps — illustrative scenarios, not customer reviews.