BEN'SHOME Couch Cushion Support Board 170cm (67") x 50cm (19.7") | Sagging Sofa Seat Fixer with 400lb Capacity

• YOUR COUCH FEELS NEW AGAIN - FIRM AND COMFORTABLE, NOT A HARD BOARD - Worried that a wood support will turn your sofa into a bench? It does the opposite. The board sits under the cushions and carries the weight your worn springs no longer hold, so the cushion above stays soft while you stop sinking into a hole. Your couch feels firm, level and comfortable again - like new the day you brought it home. Installs in about 60 seconds, no tools, no damage, no expensive replacement.
• 0.5" SOLID WOOD - 2X THICKER THAN OTHER BOARDS - HOLDS UP TO 400 LBS - Most boards sold as a fix for a sagging couch or sofa seat are thin MDF, plywood or foam, and they bow the first time someone sits down. These supports are heavy duty solid wood slats at a full half inch, sleeved in 600D Oxford fabric, and hold up to 400 lbs. They will not bend, crack or compress under daily use.
• FITS 58-67" WIDE SOFAS, 19.7" SEAT DEPTH - MEASURE BEFORE YOU ORDER - Take the cushions off first. For width, measure inside the frame - from the inside of the left arm to the inside of the right arm, not the outside of the sofa. For depth, measure from the back of the seat frame to the front edge. If your sofa falls between two sizes, order the smaller one. The support flexes to conform to the base and stays completely hidden under the cushions once the seats go back on.
• DOUBLE-SIDED ANTI-SLIP GRIP - IT WILL NOT SLIDE OR SHIFT - Fabric on both faces grips the sofa frame below and the couch cushion above, so the support stays where you put it instead of creeping forward when someone sits down. The boards give firm support across the seating area, while a soft fabric margin is designed to rest on the sofa base - anchoring the support and keeping hard edges away from your frame. Every board is rounded at the corners, so nothing rubs through your cushions.
• SMALL U.S. FAMILY BRAND - ORIGINAL DESIGN - BUILT TO LAST - We are a small family business in the United States, and this couch cushion support is our own design since 2019 - copied over the years by cheaper versions. It slides invisibly under your cushions and has been restoring saggy loveseats and worn chair cushions for years - saving our customers the cost of replacing their furniture. We build every board to survive years of daily sitting, with solid wood - never the cheapest material we could get away with.

• Measure Your Sofa — Remove your sofa cushions. Measure the width from the inside of one arm to the inside of the other. Then, measure the depth from the back of the seat frame to the front edge. If your sofa falls between two sizes, choose the smaller one.
• Place the Support Board — Unfold the BEN'SHOME Couch Cushion Support Board. Place it flat on the sofa's base, ensuring the anti-slip fabric grips the frame. Position it to cover the sagging area.
• Replace Cushions & Enjoy — Put your sofa cushions back on top of the support board. The board works invisibly underneath, providing firm support and restoring comfort without making the seat feel hard.

Typical situations where BEN'SHOME Couch Cushion Support Board 170cm (67") x 50cm (19.7") | Sagging Sofa Seat Fixer with 400lb Capacity helps — illustrative scenarios, not customer reviews.