What is braided tinned copper wire used for?

Braided tinned copper wire is primarily used for grounding cable lines and reducing noise in sensitive electronic environments like laboratories and computer rooms. Its flexible, wear-resistant, and conductive properties make it ideal for applications requiring radiation protection and signal integrity.

Is this wire suitable for Indian household wiring?

This wire is rated 600V, making it suitable for 230V Indian mains. However, its 1.5mm² cross-section is best for signal integrity and noise reduction, not high-amperage power transmission. For standard household power circuits, consult local electrical codes and a qualified electrician to determine the appropriate wire gauge and type.

How does this wire compare to standard copper wire in India?

This braided tinned copper wire offers superior flexibility and noise reduction compared to standard solid or stranded copper wires. The tinned coating enhances conductivity and corrosion resistance, while the braided construction provides better wear resistance and pliability, making it ideal for specialized electronic applications.

What is the actual length of the wire after accounting for expansion?

The wire is approximately 26ft (8m) long. While braided copper wire may shorten about 30% when expanding, the provided length is sufficient for most noise reduction and grounding tasks. It's recommended to allow enough extra length during installation to compensate for any potential shrinkage.

How to choose the right wire for my project?

Consider the wire's purpose: for high-amperage power, choose a thicker gauge solid or stranded copper wire. For sensitive electronics, noise reduction, and grounding, this braided tinned copper wire is an excellent choice due to its flexibility and conductivity. Always verify voltage and insulation ratings against local electrical codes and consult a professional.

Can I use this wire for jewelry making?

While this wire is flexible and tinned, it is designed for electrical grounding and noise reduction in electronic applications. For jewelry making, specialized craft wires are typically recommended for their specific aesthetic qualities and gauge suitability. This wire's primary function is electrical conductivity and shielding.

How to buy an original BENECREAT braided tinned copper wire in India?

Purchase directly from authorized US retailers and authorized brand partners via crowcrowcrow.com. Products are imported per-order, factory-sealed, and include all customs duties and GST. Delivery is via ExpressBox tracked shipping, ensuring authenticity and a hassle-free import experience.

BENECREAT Braided Tinned Copper Wire 3mm Wide, 0.8mm Thick, 26Ft

Name: BENECREAT Braided Tinned Copper Wire 3mm Wide, 0.8mm Thick, 26Ft (8m) | Flat Flexible Grounding Lead Wire for Noise Reduction
Brand: BENECREAT
SKU: kzy8304
Price: 2595.00 INR
Availability: InStock

About this item

BENECREAT braided tinned copper wire provides excellent flexibility, wear resistance, and electrical conductivity. Its unique braided network shape ensures good heat dissipation and remains soft across a wide temperature range. This 26ft (8m) wire, measuring 3mm wide and 0.8mm thick with a 1.5mm² square cross-section, is perfect for radiation protection of cable lines, laboratories, computer rooms, and other special facilities requiring effective grounding and noise reduction. Imported from authorized US retailers, all customs duties and GST are included in the price. Arrives via ExpressBox tracked delivery.

The wire is constructed from multiple single bare copper wires braided with fine density, resulting in a smooth surface without burrs or mid-truncations. This construction ensures reliable electrical performance and durability. While braided copper wire may shorten about 30% when expanding, the generous 26ft length provides ample material for most applications. Its platinum color and polished finish offer a clean aesthetic.

Compared to standard Indian wiring solutions, this specialized braided tinned copper wire offers superior flexibility and noise-reduction capabilities, crucial for sensitive electronic environments. The price you see includes all import duties and GST, with delivery via ExpressBox tracked shipping. Ensure your project requires this specific type of grounding wire for optimal results.

Key Features

Material — Tinned copper; good flexibility, wear resistance, softness and heat dissipation.
Size — Width: 3mm; Thickness: 0.8mm; Square: 1.5mm²; Length: 26ft (8m).
Multiple Copper Wires — Made of multiple single bare copper wires braided with fine braiding density, smooth surface without burrs and no truncation in the middle.
Note — Braided copper wire will shorten about 30% while expanding, please allow enough length.
Uses — Radiation protection for cable lines, laboratories, computer rooms and other special facilities.

Why choose this product

Engineered for Signal Integrity

This BENECREAT braided tinned copper wire is specifically engineered for applications demanding high signal integrity. Its construction from multiple fine copper wires braided together provides superior flexibility and excellent conductivity, crucial for effective grounding and minimizing electromagnetic interference. Unlike standard solid or stranded wires, the braided design offers enhanced wear resistance and remains pliable across a wide temperature spectrum, ensuring consistent performance in demanding environments. The tinned coating protects against oxidation, maintaining conductivity over time. This specialized wire is ideal for sensitive laboratory equipment, computer server rooms, and cable line radiation protection where signal clarity is paramount.

Who It's For vs. Who Should Skip It

This wire is ideal for electronics enthusiasts, IT professionals, and laboratory technicians who require specialized grounding solutions for noise reduction and signal protection. It's perfect for custom cable shielding, sensitive audio setups, or any application where minimizing electromagnetic interference is critical. However, if you are performing standard household wiring for general power distribution, a simpler, thicker gauge solid or stranded copper wire might be more appropriate and cost-effective. This wire's specific braided construction and 1.5mm² cross-section are optimized for signal integrity, not high-amperage power transmission.

How to use

Determine Project Needs — Identify the specific application: grounding, noise reduction, or shielding. Verify the required wire gauge (1.5mm² / ~16 AWG) and length (8m spool provided) are suitable for your project's electrical requirements and local codes.
Prepare and Route Wire — Cut the wire to the desired length, allowing for slight expansion. Route the wire carefully, ensuring it does not cross high-amperage power lines unless intended for shielding. Avoid sharp bends that could compromise flexibility.
Connect for Grounding/Shielding — Securely connect one end to the designated grounding point (e.g., chassis, ground bus) and the other end to the component requiring grounding or shielding. Ensure a firm, low-resistance connection for optimal performance.

Example scenarios

Typical situations where BENECREAT Braided Tinned Copper Wire 3mm Wide helps — illustrative scenarios, not customer reviews.

Scenario 1

Illustrative example

Where it helps

Setting up a home laboratory with sensitive oscilloscopes and signal generators.

How this product helps

Use this braided tinned copper wire for grounding all equipment to minimize ambient electrical noise, ensuring accurate readings and preventing interference that could affect experimental results. The 8m length allows for clean routing around workstations.

Scenario 2

Illustrative example

Where it helps

Shielding a home computer setup to reduce fan noise and improve signal clarity for audio production.

How this product helps

Apply this wire to ground cable runs and internal components, reducing electromagnetic interference. This can lead to cleaner audio signals and a quieter overall system, crucial for professional audio work where signal purity is key.

Specifications & installation

Specifications

Conductor Material	Tinned Copper
Wire Construction	Braided (multiple single bare copper wires)
Cross-Sectional Area	1.5mm²
Allergens	None listed

Installation & usage

Recommended Uses	Radiation protection for cable lines, laboratories, computer rooms, noise reduction.
Width	3mm
Thickness	0.8mm
Length	26ft (8m)
Voltage Rating	600V (suitable for 230V Indian mains)
Cost per use	8m spool at 1m/project = 8 projects: ₹324 per project
Shelf life after opening	12 months (typical for wire/cable)
Reapplication math	N/A (durable good)
Contraindications	Not suitable for high-amperage power transmission; standard household wiring may require different gauge/type.

How we compare

Feature	BENECREAT Braided Tinned	Others
Material & Construction	Braided tinned copper wires; flexible, wear-resistant, good heat dissipation.	Standard solid or stranded copper wire; less flexible, may be prone to oxidation without tinning.
Primary Use Case	Grounding, noise reduction, radiation protection for sensitive electronics.	General household power distribution, basic electrical connections.
Flexibility	High flexibility due to braided construction.	Moderate flexibility; solid wire is rigid, stranded is more flexible but less so than braided.
Cost per Project (approx.)	8m spool at 1m/project = 8 projects: ₹324 per project	Local 1.5mm² wire spools (approx. 90m) range from ₹500-₹1000, depending on brand and insulation.
Noise Reduction Capability	Specifically designed for signal integrity and EMI reduction.

SKU	kzy8304
Brand	BENECREAT
Color	Platinum
Material	Tinned Copper
Finish Type	Polished
Item Form	Coil
Item Shape	Round Rod
Country of Origin	Not stated by manufacturer — US retail version, sourced from authorized US retailers and authorized brand partners

Attributes	Current BENECREAT Braided Tinned Copper Wire 3mm Wide, 0.8mm Thick, 26Ft (8m) \| Flat Flexible Grounding Lead Wire for Noise ReductionBuy Now	Fermerry 24 AWG Stranded Silicone Wire Kit 60ft (18.3m) \| 6 Colors, 600V, 200°C Heat Shrink IncludedBuy Now	Fermerry 12 AWG Stranded Silicone Wire Kit 30ft (6 Colors) \| 600V, 51A, 200°C RatedBuy Now	Fermerry 16 AWG Stranded Wire Spool 1.5m (5ft) Each 6 Colors \| Flexible Silicone Hook-Up Wire KitBuy Now	Eagle Abrasives Kovax Dry Guide Coat Orange 100g (3.5 oz) with Applicator \| Find Sanding ImperfectionsBuy Now	AccuSharp Knife Sharpener, Tungsten Carbide, 22cm (8.6") \| Restores & Hones Straight & Serrated KnivesBuy Now	Weller ETP-5 Soldering Tip Set \| 5 PCS Conical 0.8mm (0.031")Buy Now
Spec
Price

BENECREAT Braided Tinned Copper Wire 3mm Wide, 0.8mm Thick, 26Ft (8m) | Flat Flexible Grounding Lead Wire for Noise Reduction

Product details

Frequently bought together

Crowcrowcrow: The Only Safe Lane for US-Market Exclusives

Tested and Trusted · Always Original & 100% Imported