ATPEAM 5cm-17.8cm Engine Cylinder Hone Tool with 3 Replaceable 220 Grit Stones | Deglazer for Drills

• High Quality: Constructed of premium metal materials provide this brake caliper hone tool with maximum strength, durability, and longevity
• Function: Remove carbon, rust, and heat glaze deposits from your caliper and piston cylinder walls with the 1-1/8 Inch cylinder bore honing tool small engine cylinder hone kit
• 3 Stone Design: The flexible shaft and spread-control tension nut allow faster cutting and maneuverability; 3 stone design of this small brake cylinder hone tool makes insertion easy by self-centering; Stone sleeves add strength and protect your abrasive stones when not in use
• Adjustable Range: Easily adjust the range and pressure placed against your cylinders for well-controlled tension and maximum effectiveness in creating a smoother, cleaner surface; Spring and knurled adjusting nut increase tension and lock the drill hone metal arms in place while working; Use on cylinders with a 2 inch to 7 inch diameters (5 to 17.8cm)
• Wide Application: This cylinder hone tool compatible with your electric drills, simply lubricate with brake fluid and run at low speeds moving up and down the sides of your engine cylinders

• Prepare the Tool and Cylinder — Lubricate the ATPEAM cylinder hone tool with honing fluid or light motor oil. Ensure the cylinder bore is clean and free of debris. Insert the hone into the cylinder bore.
• Adjust Tension and Connect Drill — Connect the hone's flexible shaft to a standard electric drill. Adjust the knurled nut to set the desired tension, ensuring the abrasive stones press firmly against the cylinder walls.
• Hone the Cylinder — Run the drill at low RPMs (typically 300-500 RPM). Move the hone tool slowly up and down the length of the cylinder bore to create a consistent 45-degree cross-hatch pattern.
• Clean and Inspect — Remove the hone tool and thoroughly clean the cylinder bore with a solvent to remove all abrasive residue. Inspect the surface for a uniform cross-hatch finish. Repeat if necessary.

Typical situations where ATPEAM 5cm-17.8cm Engine Cylinder Hone Tool with 3 Replaceable 220 Grit Stones | Deglazer for Drills helps — illustrative scenarios, not customer reviews.