TANGSPOWER 54.6V Lithium Battery Charger 48V 13S | Universal 100-240V Input, Overload & Short Circuit Protections

• Output 54.6V, World Wide Input Voltage 100-240VAC 50/60Hz, compatible with 48V 13S lithium batteries (Battery voltage: Should be 48V (13S lithium battery))
• 105℃ Output capacitor, global applicable AC Input voltage.100% full load aging test, Internal EMI filter, ripple minimum. The precision current between ±0.1A, the voltage tolerance is ±0.1V, absolutely not virtual marking
• The charger Built-in simply fan, with radiating fin surrounding the board, dissipating the heat through the shell, So some hot on the shell when charging is very normal, but it is durable
• The Charger protected: Our product is equipped with ‌thermal protection‌ and ‌overload protection‌ to prevent charging issues caused by overheating or excessive current; TANGSPOWER 54.6V Charger includes multiple safety protections including overcharge protection. It features thermal protection and overload protection to prevent charging issues from overheating or excessive current. The charger automatically stops charging when the battery is full (indicated by the green light), which prevents overcharging. It also has built-in protections for short circuit, overload, and over voltage situations.
• This charger word with Rad Runner, Aventon Level. The charger outputs 54.6V at 1.5A, which is standard for 48V batteries, specifically 12Ah to 15Ah capacity batteries

• Connect the battery — First, connect the charger to the lithium battery, ensuring correct polarity, then connect the charger to AC power.
• Start charging — Plug into power; LED turns red indicating charging. When full, LED turns green, then disconnect after 2-3 hours.
• Disconnect safely — Unplug from AC, then disconnect the battery. Avoid pulling the battery plug during charging to prevent damage.

Typical situations where TANGSPOWER 54.6V Lithium Battery Charger 48V 13S | Universal 100-240V Input helps — illustrative scenarios, not customer reviews.