3M Safety-Walk Slip Resistant Tape 2 in x 15 ft (Pack of 2) | High-Traction Black Tape for Stairs & Wet Areas

• HELPS CREATE SAFER ENVIRONMENT where water is likely to create slippery surfaces such as bathrooms and recreational areas
• USES INCLUDE showers, tubs and surfboards, and around hot tubs and pools
• RESISTS WEAR for enhanced durability
• SELF-ADHESIVE BACKING for quick and easy application
• ADHERE TO CLEAN, DRY SURFACES without wrinkling, curling, tearing, shrinking or lifting
• EASY TO APPLY, cut to size with scissors
• COMFORTABLE to walk on with bare feet
• FOR BEST RESULTS, area must be primed with a high-strength contact adhesive, such as 3M Hi-Strength 90 Spray Adhesive

• Prepare the Surface — Ensure the area is clean, dry, and free of dust or grease. For optimal adhesion, especially in humid Indian climates, prime the surface with a high-strength contact adhesive like 3M Hi-Strength 90 Spray.
• Cut to Size — Measure and cut the tape to your desired length using standard scissors. This allows for a custom fit on stairs, ladders, ramps, or any specific area needing enhanced traction.
• Apply Firmly — Peel off the backing and apply the tape firmly to the prepared surface, pressing down to ensure complete adhesion and avoid wrinkles or air bubbles. Ensure edges are well-adhered.
• Allow Curing Time — Allow the adhesive to cure for at least 24 hours before exposing the taped area to heavy foot traffic or moisture. This ensures maximum bond strength and longevity.

Typical situations where 3M Safety-Walk Slip Resistant Tape 2 in x 15 ft (Pack of 2) | High-Traction Black Tape for Stairs & Wet Areas helps — illustrative scenarios, not customer reviews.