HORTIPOTS 1 Inch Rubber Grommet | Leak-Free Hydroponic Connection, 25 Pack

• WATER TIGHT Rubber Grommets: in connections of DIY hydroponic systems, dutch buckets, dripping systems, siphon aquaponic systems and irrigation systems…
• LEAK-FREE SEAL: Donut-shaped Rubber Grommets help transfer water or nutrient solution from one reservoir to another one with tubing and barded fittings or piping
• DURABLE: periodically replace worn old ones in existing dripping or hydroponic systems to ensure air and water tight seals in your system
• 1 Inch Donut Rubber Grommet also goes with SCH40 3/4 inch PVC pipes or pipe's outer diameter matches grommet's inner diameter
• The inner diameter of rubber grommet is 1 inch but the drilled hole on the bucket it fits into will need to be 1.5 inch

• Prepare the drilled hole — Ensure the hole is clean and matches the inner diameter of 1 inch. Use soap or oil on fittings for easier sliding.
• Insert the grommet — Push the rubber grommet into the drilled hole, ensuring the groove is fully seated for a water-tight seal.
• Connect pipes or fittings — Insert the pipe or connector into the grommet, applying soap or oil if needed for smooth fitting. Confirm a snug, leak-proof connection.

Typical situations where HORTIPOTS 1 Inch Rubber Grommet | Leak-Free Hydroponic Connection helps — illustrative scenarios, not customer reviews.