MYFAMIREA Gray PVC Floor Transition Strip 3.05 m (10 ft) | Self-Adhesive Edging Trim for Doorways Under 5 mm Height

• PRODUCT MATERIAL — Floor transition strips are non-toxic, odorless, healthy, and environmentally friendly. The surface is scratch-resistant, abrasion-resistant, dirt-resistant, easy to clean, and not easy to stain. Different from other similar products which are made of aluminum alloy, PVC material is softer. The transition cover is beneficial to protect children or the elderly not to tripping.
• PRODUCT APPLICATION — The adhesive flooring transition is ideal for covering gaps where two flooring surfaces meet in bedrooms, living rooms, kitchens, and stairs.
• EASY TO INSTALL — Adhesive is attached to the back of the product, which can be installed and pasted after tearing it off. There is no need to punch holes in the floor and do not damage the floor. You only need to clean the floor or wall and keep it dry, cut the right size, then tear off the tape, press the transition strip until it is stable on the floor or wall.
• COVER THE GAP — Our matte anti-dust and smudge-resistant design makes us unrivaled in the market, allowing you to keep the gap cover clean and stain-free. Suitable for floor tile gap connection coverage, floor-to-floor, tile gap connection coverage. Heat transition strips with a hair dryer before use. Press and wait after applying. This will allow it to adhere better to the surface.
• SCOPE OF APPLICATION — The transition threshold strip is also suitable for covering gaps on stovetops, preventing oil stains, and oil from flowing into gaps. Because other gaps covering strips on stovetops do not have a strong fit, our products can better prevent oil stains from flowing into gaps on stovetops. If used for threshold transition, please ensure that the height of the threshold is less than 5mm.

• Prepare the Surface — Clean the floor or wall area where the transition strip will be applied. Ensure it is completely dry and free from dust, dirt, or oil for optimal adhesion. A clean surface is crucial for a strong bond.
• Cut to Size — Measure the length of the gap or doorway and cut the PVC transition strip to the required size using scissors or a utility knife. Ensure a precise cut for a neat finish.
• Apply the Strip — Gently heat the adhesive side of the strip with a hairdryer for about 30 seconds to soften it. Peel off the protective backing tape and carefully press the strip onto the prepared surface, ensuring it adheres firmly.
• Secure and Wait — Press down firmly along the entire length of the strip for at least 30 seconds to ensure maximum adhesion. Allow the adhesive to set for a few hours before walking on the area to guarantee a stable, long-lasting installation.

Typical situations where MYFAMIREA Gray PVC Floor Transition Strip 3.05 m (10 ft) | Self-Adhesive Edging Trim for Doorways Under 5 mm Height helps — illustrative scenarios, not customer reviews.