uxcell Black Matte Aluminum Foil Tape 25mm x 50m (0.98in x 164ft) | HVAC Sealing & Patching

• Per Roll Total Length : 50m/164ft; Tape Width : 25mm/0.98inch; Thickness : 0.07mm; Temperature: Short Term 120℃/ Long Term 95℃; Side Type : Single Sided Conductive.
• Aluminum Foil General Purpose - Waterproof, Flame Retardant, Strong Self Adhesive, Directly stretched around the area to be protected, no adhesives needed.
• The tape is in a black finish, Non-Reflective but absorbs light from ambient light sources. suit for blocking lighting, spills/leakages on heat-generating equipment (projectors, light cans, barn-doors, etc).
• This adhesive aluminum tape provides an excellent bond on metals, plastics, copper, ceramic, and concrete. Conformable and pressure-sensitive adhesive enables it to fit on corrugated joints and irregular corners.
• Suitable for sealing air ducts; designed to easily seal HVAC Air Ducts as well as other Hot or Cold Intakes.

• Prepare the Surface — Ensure the area to be sealed or patched is clean, dry, and free from dust, oil, or grease. For optimal adhesion, wipe down surfaces with isopropyl alcohol and allow them to dry completely.
• Measure and Cut — Measure the required length of tape. Cut the tape cleanly using scissors or a utility knife. For curved or irregular surfaces, pre-shape the tape slightly before application.
• Apply the Tape — Peel off the backing paper and carefully apply the tape to the prepared surface. Press down firmly from the center outwards to ensure full contact and eliminate air bubbles.
• Ensure Secure Seal — Apply consistent pressure across the entire length of the tape. For critical seals, overlap edges slightly and ensure all seams are fully covered to prevent leaks.

Typical situations where uxcell Black Matte Aluminum Foil Tape 25mm x 50m (0.98in x 164ft) | HVAC Sealing & Patching helps — illustrative scenarios, not customer reviews.