Rust-Oleum Universal All Surface Clear Topcoat Spray, Dead Flat Clear, 11 oz (312 g) | Professional Grade Paint for Wood, Metal, Plastic

• Works on virtually any surface including wood, plastic, metal, fiberglass, concrete, wicker, vinyl and more
• Oil-based formula with excellent adhesion prevents rust, resists fading and chipping for a long lasting finish
• Fast drying formula dries to the touch in 30 minutes and covers up to 15 sq ft per can
• Prevents rust and corrosion for enhanced durability
• Provides a soft, frosted clear pearl durable topcoat
• To spray, shake can for 1 minute after mixing ball starts to rattle and remove red safety clip from trigger

• Ensure the surface is clean, dry, and free from rust, grease, or loose paint. For best adhesion, lightly sand glossy surfaces. Work in a well-ventilated area, ideally outdoors or in a garage with the door open. — Prepare the Surface
• Shake the can vigorously for 1 minute after the mixing ball starts to rattle. Remove the red safety clip from the trigger. Hold the can upright, about 10-16 inches (25-40 cm) from the surface, and spray in a steady back-and-forth motion. — Shake and Spray
• Apply thin, even coats. Allow 30 minutes for the paint to dry to the touch and at least 1 hour between coats. Two or more light coats are recommended for optimal coverage and durability over a single heavy coat. — Apply Coats and Dry

Typical situations where Rust-Oleum Universal All Surface Clear Topcoat Spray 11 oz (325 ml) Frosted Pearl Clear | Professional Grade Paint for Wood helps — illustrative scenarios, not customer reviews.