How to buy an original Permatex Form-A-Gasket #2 Sealant in India?

Purchase from crowcrowcrow.com to ensure you receive an original, factory-sealed Permatex Form-A-Gasket #2 Sealant, sourced from authorized US retailers. All customs duties and GST are included in the listed price, and your order is shipped via ExpressBox with tracking for delivery across India.

Is this Permatex sealant safe for engine sensors?

Permatex Form-A-Gasket #2 Sealant is a non-hardening type and not specifically designated as sensor-safe. While it resists common automotive fluids, it's best to use sensor-safe RTV silicones near oxygen sensors and electronic components to avoid potential corrosion during curing. This product is primarily for dressing gaskets.

How long does this sealant take to cure?

Permatex Form-A-Gasket #2 Sealant is slow-drying and non-hardening, meaning it remains pliable and does not fully cure to a rigid state. This characteristic allows for easy disassembly of parts. It is designed to seal gaskets rather than form a permanent bond.

What is the temperature range for this gasket sealant?

This sealant operates effectively in a wide temperature range, from -65°F to 400°F (-54°C to 204°C). This makes it suitable for various automotive applications in India, including engine bays that experience significant heat fluctuations.

Can I use this sealant for oil pan gaskets?

Yes, Permatex Form-A-Gasket #2 Sealant is suggested for applications like oil pan gaskets and valve cover gaskets. Its ability to resist oil and provide a reliable seal on flexible and stamped parts makes it a suitable choice for these engine components.

What are the side effects of using this sealant?

The primary side effect is that it does not fully cure to a hard state, which is by design for easy disassembly. However, it contains chemicals like Methyl Isobutyl Ketone and Lead, which are listed under California Proposition 65. Ensure adequate ventilation during application and avoid skin contact.

What is the best sealant for automotive use in India?

The 'best' sealant depends on the specific application. For dressing cut gaskets and ensuring easy disassembly, Permatex Form-A-Gasket #2 Sealant is excellent. For permanent gasket formation or high-pressure systems, a sensor-safe RTV silicone might be preferred. Always check the product's resistance and temperature ratings for your Indian vehicle's needs.

Can I use this sealant daily?

This sealant is not intended for daily application like a cosmetic product. It is used during automotive maintenance to seal gaskets. Its slow-drying, non-hardening nature means it remains pliable, and it is applied as needed during repairs, not on a daily basis.

Permatex 80012 Black Gasket Sealant

Name: Permatex 80012 Black Cut Gasket Coating - 2 Oz. Flexible, Oil-Resistant Silicone Sealant
Brand: Permatex
SKU: uxh0024
Price: 1516.00 INR
Availability: InStock

About this item

Permatex Form-A-Gasket #2 Sealant is a trusted solution for Indian mechanics needing to dress cut gaskets and stamped parts. This slow-drying, non-hardening formula ensures a reliable seal without permanent adhesion, allowing for straightforward disassembly. It's engineered to withstand common automotive fluids and fuels, making it a versatile choice for engine bay repairs.

This black sealant operates effectively across a wide temperature range, from -65°F to 400°F (-54°C to 204°C), suitable for the demanding conditions of Indian traffic and varied climates. Its non-hardening nature makes it perfect for applications like valve cover gaskets and oil pan gaskets, where flexibility and ease of maintenance are key.

Imported directly from authorized US retailers, this 1.5 oz (44.36 ml) tube of Permatex Form-A-Gasket #2 Sealant is available in India with all customs duties and GST included. Delivered via ExpressBox, it offers a reliable sealing solution for both import and domestic vehicles.

Key Features

Slow-drying, non-hardening sealant approved for use in aviation as well as automotive applications
Designed for dressing/sealing cut gaskets on flexible/stamped parts
Allows for easy disassembly if required; resists gasoline, oil and grease
Temperature Range: -65°F to 400°F (-54°C to 204°C)
Suggested Applications: Valve cover gaskets, and oil pan gaskets

Why choose this product

Engineered for Durability and Ease

Permatex Form-A-Gasket #2 Sealant is specifically formulated for sealing cut gaskets and stamped parts where easy disassembly is crucial. Unlike permanent gasket makers, its slow-drying, non-hardening nature ensures that components can be separated without damage during future maintenance. This USA-sourced sealant resists common automotive fluids and fuels, operating reliably in temperatures from -65°F to 400°F (-54°C to 204°C). Its proven performance makes it a go-to choice for mechanics seeking dependable sealing solutions for valve covers and oil pans.

Ideal for Indian Mechanics, Skip if...

This sealant is perfect for mechanics in India working on both domestic and imported vehicles who need a reliable gasket dressing that allows for easy part removal. It's excellent for valve cover and oil pan gaskets. Skip this product if you require a fast-curing, permanent gasket maker or a sealant for high-pressure fuel systems. For those applications, a different type of gasket sealant or RTV silicone might be more appropriate.

How to use

Clean and dry all gasket surfaces thoroughly. Remove all old gasket material, oil, grease, and other contaminants. Ensure the metal surfaces are free from rust or dirt for optimal adhesion. — Prepare the Surface
Apply a continuous bead of Permatex Form-A-Gasket #2 Sealant to one surface. For cut gaskets, dress both sides. Ensure an even layer, avoiding excessive application that could squeeze out excessively. — Apply the Sealant
Assemble the parts immediately after applying the sealant. Tighten fasteners to the manufacturer's specified torque. Allow the sealant to remain pliable for easy disassembly later. — Assemble and Tighten

Example scenarios

Typical situations where Permatex Form-A-Gasket #2 Sealant Black 44.36 ml (1.5 Fl Oz.) | Non-Hardening for Cut Gaskets helps — illustrative scenarios, not customer reviews.

Scenario 1

Illustrative example

Where it helps

Mechanic needs to reseal a leaking oil pan gasket on a popular Indian sedan during routine service.

How this product helps

Using Permatex Form-A-Gasket #2 Sealant ensures a reliable seal that resists engine oil. Its non-hardening property allows for easy removal of the oil pan if further adjustments are needed later, without damaging the gasket.

Scenario 2

Illustrative example

Where it helps

Replacing a valve cover gasket on a motorcycle in humid Mumbai, requiring a sealant that won't degrade.

How this product helps

This sealant's resistance to oil and its wide temperature range make it suitable for motorcycle engines. The non-hardening formula ensures it won't crack or degrade under heat and humidity, maintaining a seal over time.

Specifications & installation

Specifications

Cure Type	Slow-drying, Non-hardening
Temperature Range	-65°F to 400°F (-54°C to 204°C)
Fluid Resistance	Gasoline, Oil, Grease, Common Shop Fluids
California Proposition 65	Contains Methyl Isobutyl Ketone, Lead

Installation & usage

Suggested Applications	Valve cover gaskets, oil pan gaskets, dressing cut gaskets, sealing stamped parts
Application Frequency	As needed for gasket sealing and dressing
Shelf Life After Opening	12 months (typical for sealants)
Cost per use	1.5 oz tube at 0.1 oz/application = ~15 applications: ₹101 per application
Contraindications	Not for permanent gasket sealing; not for high-pressure fuel systems.
Allergens / Common Irritants	Contains Methyl Isobutyl Ketone, Lead (per Prop 65)

How we compare

Feature	Permatex Form-A-Gasket #2	Others
Cure Type	Slow-drying, Non-hardening (easy disassembly)	Varies; some Indian brands offer fast-cure RTVs, others non-hardening types.
Temperature Resistance	-65°F to 400°F (-54°C to 204°C)	Typically up to 200°C (392°F) for common Indian automotive sealants.
Fluid Resistance	Gasoline, Oil, Grease, Common Shop Fluids	Resistant to oil and grease; gasoline resistance varies by brand.
Cost per use	1.5 oz tube at 0.1 oz/application = ~15 applications: ₹101 per application	Local 1.5 oz tubes range from ₹200-₹400, offering similar application counts.
California Proposition 65	Contains Methyl Isobutyl Ketone, Lead	Indian products may not carry similar chemical warnings.

SKU	uxh0024
GTIN	00686226800152
Brand	Permatex
Model Name	Form-A-Gasket #2
Part Number	80015
Color	Black
Item Form	Liquid
Material	Plastic (Tube)
Size	1.5 Fl Oz. (44.36 ml)
Item Weight	2.1 ounces (0.059 kg)
Dimensions	3.81 x 0.75 x 8 inches (9.6 x 1.8 x 20.2 cm)
Surface Recommendation	Metal
Country of Origin	Not stated by manufacturer — US retail version, sourced from authorized US retailers

Attributes	Current Permatex Form-A-Gasket #2 Sealant Black 44.36 ml (1.5 Fl Oz.) \| Non-Hardening for Cut GasketsBuy Now	Permatex Form-A-Gasket #2 Sealant 29.6ml (1 Fl Oz) \| Slow-Drying Non-Hardening Aviation & Automotive SealantBuy Now	ProCase NRR 28dB Passive Noise Reduction Earmuffs \| Adjustable Metal Frame, Foldable Design, PinkBuy Now	STA-BIL Storage Fuel Stabilizer 4 oz (118 ml) Bottles — 24-Pack \| Keeps Fuel Fresh for 2 YearsBuy Now	Meguiar's Mirror Glaze Ultra-Cut Compound 946ml (32 Fl Oz) \| Removes Scratches & OxidationBuy Now	Taylor White 1 Pack Aluminum Thermometer -60F to 120F (-50C to 50C) \| Indoor/Outdoor Weather ResistantBuy Now	Fair-Rite FT50-43 Ferrite Toroid Core 12.7 mm (0.500 inches) Outer Diameter \| EMI/RFI SuppressionBuy Now
Spec
Price

Permatex Form-A-Gasket #2 Sealant Black 44.36 ml (1.5 Fl Oz.) | Non-Hardening for Cut Gaskets

Option: Black

Product details

Frequently bought together

Crowcrowcrow: The Only Safe Lane for US-Market Exclusives

Tested and Trusted · Always Original & 100% Imported