Is ANYCUBIC 3D Printer Resin safe for use in India?

Yes, ANYCUBIC 3D Printer Resin is safe for use in India when handled properly. It's classified as an environmentally hazardous substance and requires gloves and good ventilation during use. All customs duties and GST are included in the price, and it ships via ExpressBox tracked delivery within 12-14 days.

How do I clean prints made with ANYCUBIC 3D Printer Resin?

Clean prints with high-concentration alcohol (95% or higher) for approximately 30 seconds. Ensure you are wearing gloves and working in a well-ventilated area. Avoid pouring used resin back into the original bottle to maintain purity.

What is the best way to store ANYCUBIC 3D Printer Resin?

Store ANYCUBIC 3D Printer Resin sealed at temperatures between 15°C and 35°C. Lower temperatures increase viscosity. Keep it sealed to prevent moisture absorption and store away from direct sunlight to maintain its quality and performance.

Will this resin work with my 3D printer?

This 405nm UV resin is suitable for most LCD 3D printers. Verify your printer's compatibility with 405nm wavelength UV light. It is not compatible with FDM/filament printers. Check your printer's manual for specific exposure time parameters.

What are the benefits of using ANYCUBIC 3D Printer Resin?

This resin offers strong adhesion, appropriate toughness for detailed prints, and fast curing. It shows good stability in humid environments and has a low shrinkage rate, ensuring high precision and smooth model surfaces.

How to choose the right 3D printer resin?

Consider your printer type (LCD/DLP/SLA vs FDM) and the required cure wavelength (this is 405nm). Choose based on desired print properties like precision, toughness, flexibility, or color. This ANYCUBIC resin is ideal for high-precision LCD printing.

What are the side effects of ANYCUBIC 3D Printer Resin?

Direct skin contact may cause irritation or allergic reactions. Always wear gloves and ensure good ventilation. If contact occurs, rinse immediately with plenty of water. Seek medical attention if unwell. It is classified as an environmentally hazardous substance.

Can I use ANYCUBIC 3D Printer Resin daily?

Yes, this resin is suitable for daily use in 3D printing projects, provided you follow safety guidelines like wearing gloves and ensuring proper ventilation. Its fast curing and high precision make it efficient for frequent printing.

ANYCUBIC Black 1kg Resin | High Precision Fast Curing UV Photopolymer for LCD 3D Printing

Name: ANYCUBIC 3D Printer Resin 1kg (2.2 lb) Black | High Precision Fast Curing UV Photopolymer Resin for LCD 3D Printing
Brand: ANYCUBIC
SKU: gft4333
Price: 2860.00 INR
Availability: InStock

About this item

ANYCUBIC 3D Printer Resin in Black (1kg) is engineered for high precision and fast curing on LCD 3D printers. Sourced from authorized US retailers, this 405nm UV photopolymer resin ensures strong adhesion and appropriate toughness for detailed prints. It maintains good stability in humid environments, making it suitable for India's climate. All customs duties and GST are included in the price, with ExpressBox tracked delivery to your pincode within 12-14 days.

This resin features a low shrinkage rate (3.72-4.24%) for smooth surfaces and perfectly restored 3D printing works. Its high fluidity and fast curing properties contribute to a higher printing success rate. The formulation is designed to show bright color effects after curing, ideal for DIY projects, jewelry design, and educational kits. Store at 15-35°C to maintain optimal viscosity.

For best results, shake well before use and avoid direct sunlight. Always wear gloves and ensure good ventilation. Clean prints with high-concentration alcohol (95%+) for about 30 seconds. Do not mix used resin with unused resin to prevent contamination. Unused resin can be sealed in airtight containers and stored in a dark place.

Key Features

EFFICIENT AND STABLE: LCD 3D printer resin has high fluidity and fast curing. After curing, it shows good stability in humid and corrosive environment
MULTI-COLOR: This 405nm 3D resin contains high-quality pigments, which makes the printed works show bright and amazing color effects
HIGH PRECISION: Photosensitive resin has low shrinkage and high precision, 3D resin shrinkage rate of 3.72-4.24%, to ensure the high precision and smooth surface of the model, and perfectly restore the 3D printing works
STORAGE METHOD: ANYCUBIC Resin recommended to store at 15℃-35℃. The lower the temperature, the higher the resin viscosity. Keep sealed to avoid moisture
APPLICATION: UV Resin Suitable for most LCD 3D Printing. Suitable for DIY, jewelry design, classroom teaching and garage kit production, save the cost of your hobby

Why choose this product

Engineered for Performance and Detail

ANYCUBIC 3D Printer Resin is formulated for superior adhesion and toughness, ensuring prints are both detailed and durable. Its low shrinkage and high fluidity contribute to a high success rate, even for complex models. The 405nm UV wavelength is compatible with most LCD 3D printers. Imported from authorized US retailers, this resin is factory-sealed and arrives with all customs duties and GST pre-paid.

Ideal for Makers in India

This resin is best for users with LCD/DLP/SLA 3D printers needing reliable, high-precision results. It performs well in humid Indian conditions. Skip if you require resin for FDM printers or if you have extreme sensitivity to chemical odors, as good ventilation is essential.

How to use

Ensure good ventilation. Wear gloves and eye protection. Shake the resin bottle well for 1-2 minutes to ensure uniform consistency. Avoid direct sunlight. — Prepare Your Workspace
Pour the resin into your LCD 3D printer's vat. Set your printer's exposure parameters (Bottom Exposure: 20-60s, Normal Exposure: 5-15s) and start the print. — Load Resin and Print
After printing, carefully remove the model. Clean it using high-concentration alcohol (95%+) for about 30 seconds. Post-cure the model under a UV light source for optimal hardness and stability. — Clean and Cure Prints

Example scenarios

Typical situations where ANYCUBIC 3D Printer Resin 1kg (2.2 lb) Black | High Precision Fast Curing UV Photopolymer Resin for LCD 3D Printing helps — illustrative scenarios, not customer reviews.

Scenario 1

Illustrative example

Where it helps

A hobbyist in Chennai needs to print intricate jewelry prototypes for a client.

How this product helps

This ANYCUBIC resin's high precision and low shrinkage ensure detailed models. The 1kg pack offers value for multiple prototypes, and its stability in humid climates prevents print failures during monsoon season.

Scenario 2

Illustrative example

Where it helps

A small workshop in Delhi needs to produce small batches of functional parts quickly.

How this product helps

The fast-curing nature of this resin significantly reduces print times, allowing for quicker turnaround. Its toughness ensures parts can withstand moderate use, and the 1kg quantity is efficient for small production runs.

Specifications

Composition

Main Material	Resin Monomer & Photo Initiator
Key Actives	Isooctyl acrylate, 2-hydroxy-1-(4-(4-(2-hydroxy-2-methylpropionyl)benzyl)phenyl)-2-methylpropan-1-one
Shrinkage Rate	3.72-4.24%
Allergens	May cause skin irritation or allergic reaction. Contains isooctyl acrylate.

Usage

Application	LCD 3D Printing, DIY, jewelry design, classroom teaching, garage kit production
Bottom Exposure Time	20-60s
Normal Exposure Time	5-15s
Cleaning Method	High-concentration alcohol (95%+) for ~30s
Storage Temperature	15-35°C
Cost per use	1 kg bottle — ₹2,860 per kg
Shelf life after opening	12 months (category default for resins)
Reapplication math	1kg bottle provides ample resin for numerous projects; actual print count varies by model size and settings.

How we compare

Feature	ANYCUBIC 3D Printer	Others
Resin Type	405nm UV Photopolymer Resin	Varies by brand; often 405nm UV Photopolymer
Cure Speed	Fast Curing	Varies; some brands offer fast-cure options
Precision & Shrinkage	High Precision, Low Shrinkage (3.72-4.24%)	Varies; some offer comparable precision
Adhesion & Toughness	Strong Adhesion, Appropriate Toughness	Varies; quality can differ significantly
Cost per kg	1 kg bottle — ₹2,860 per kg	₹2,000 - ₹4,000 per kg (approx.)

SKU	gft4333
Brand	ANYCUBIC
Product Name	3D Printer Resin
Color	Black
Net Weight	1 kg (2.2 lb)
Dimensions	12 cm x 3 cm x 3.8 cm
Cure Wavelength	405nm
Material	UV Photopolymer Resin Monomer & Photo Initiator
Country of Origin	Not stated by manufacturer — US retail version, sourced from authorized US retailers and authorized brand partners

Attributes	Current ANYCUBIC 3D Printer Resin 1kg (2.2 lb) Black \| High Precision Fast Curing UV Photopolymer Resin for LCD 3D PrintingBuy Now	ANYCUBIC Grey 1kg UV Photopolymer Resin \| High Precision Fast Curing for LCD 3D PrintingBuy Now	ANYCUBIC 405nm High Precision Fast Curing Photopolymer Resin 1kg (2.2 lb) HD Grey \| For LCD 3D PrintingBuy Now	uxcell MR126-2RS Deep Groove Ball Bearings 6mm x 12mm x 4mm \| Double Sealed Chrome Steel (10 Pcs)Buy Now	HARFINGTON M2 PVC Flat Washers 2mm ID x 5mm OD x 0.3mm Thick \| 300-Piece Pack for Sealing & Gasket ApplicationsBuy Now	Tnisesm 10SQ050 Schottky Blocking Diode 50V 40 Pcs \| Rectifier Diode Kit for Solar PanelBuy Now	NANKADF DC Power Supply 30V 5A 150W \| Variable Bench Power Supply with USB Quick-Charge & Memory PresetsBuy Now
Spec
Price

ANYCUBIC 3D Printer Resin 1kg (2.2 lb) Black | High Precision Fast Curing UV Photopolymer Resin for LCD 3D Printing

Product details

Frequently bought together

Crowcrowcrow: The Only Safe Lane for US-Market Exclusives

Tested and Trusted · Always Original & 100% Imported