Krytox GPL 206 Grease Pure PFPE/PTFE 59ml (2 oz) | Extreme Temperature & Chemical Resistant Lubricant

• Temp Range: -36C thru 260C: Viscosity 25cSt/100C, 240cSt/40C; Stable in a wide variety of operating conditions/environments
• Nonflammable: Krytox Grease contains only carbon, oxygen & fluorine, (no hydrogen or silicone); Will not burn or support combustion; Passes impact standards with LOX, Nitrogen Tetroxide, Nitric Acid
• Chemically Inert: Resistant to oxygen and inert to most all chemicals; Inert nature allows Krytox Grease to outlast/outperform hydrocarbon products; Chemically insoluble in nearly all solvents
• At operating temps and pressures Krytox Grease is highly resistant to attack by gaseous and liquid oxygen; The preferred choice in oxygen; use and manufacturing industry
• Exposure to significant radiation causes only minor DE polymerization (8% decrease of viscosity) and no formation of solids or sludge or change in appearance

• Ensure the components to be lubricated (valves, bearings, seals) are clean, dry, and free from old grease or contaminants. Use appropriate industrial cleaning solvents if necessary, ensuring they are compatible with the base materials. — Prepare the Surface
• Apply a small, even amount of Krytox GPL 206 Grease to the moving parts using a brush, syringe, or automated dispensing system. Avoid over-application, as a thin, consistent layer is sufficient for protection. — Apply Lubricant
• Reassemble the equipment and perform a test run. Monitor for smooth operation and check for any signs of leakage or material incompatibility. The grease's stability ensures long-lasting performance, reducing the need for frequent reapplication. — Assemble and Test

Typical situations where Krytox GPL 206 Grease 227 g (8 oz) | Pure PFPE/PTFE Lubricant for Extreme Conditions helps — illustrative scenarios, not customer reviews.